Vivitar DVR 914HD User Manual page 9

Installing the Memory Card:
To properly insert the Micro SD Card, follow the instructions below:
1. Power off the camcorder.
2. Insert the Micro SD Card into the Micro SD Card slot in the direction as shown above.
3. Gently press the Micro SD Card until you hear a slight clicking sound. This indicates the
memory card has been inserted correctly.
4. To remove the card, gently press on the edge of the card to release it and pull the card out.
IMPORTANT:

Please power the camcorder off before plugging in or taking out the memory card.

If the card is inserted or removed while the camcorder's power is on, it may damage the
card and/or any recorded data. Always confirm that the power is off before inserting the
card into the camcorder.

Make sure there is room on the Micro SD Memory Card for additional images. If the Micro
SD Memory Card is full, additional images will not be added to the memory card.
POWERING ON – OFF / ENERGY SAVE
To power on the camcorder:
1. Press and hold the
2. The LCD displays turns on and a sound can be heard from the camcorder's microphone.
Power button for about 3 seconds.
8