SING THE RIPOD Using Your Action Camera ......................13 ..............................13 OWERING AMERA ............................... 13 HANGING AMERA Vivitar Experience Image Manager Software ................14 ............................14 OMPUTER YSTEM EQUIREMENTS – U CD ROM ......................... 15 NSTALLING THE OFTWARE SING THE –...
Introduction Thank you for purchasing the Vivitar DVR 988D HD Wi-Fi Action Cam with Dual Lens 360° View. Everything you need to take high definition digital videos and photos is included with your camera. This unique, ultraportable camera design is adapted specifically for this camera and can be used to capture special moments in many different environments.
Page 4
This camera is a plug and play device. You can download the pictures and videos without the software by directly accessing the camera’s memory card from your computer. We would however recommend that you install the Vivitar Experience Image Manager software to enjoy the full Vivitar experience.
What’s Included 1. Wi-Fi Action Camera 2. USB Cable 3. Remote Control 4. Bicycle Mount 5. Helmet Mount with 3M Sticker 6. Tripod NOTE: Class 6- Class 10 Micro SD Memory Card (up to 32GB) needed for normal use. Micro SD Memory Card not included.
Initial Setup CHARGING THE BATTERY The camera includes a built-in lithium battery. Use the supplied USB cable for camera charging. Connect the USB cable from the camera to a power source, such as to the USB port of your computer. While charging, the indicator light appears blue and remains on.
INSTALLING THE MICRO SD MEMORY CARD Make sure to install a High Speed Class 6 or higher Micro SD Memory card. A Micro SD Card must be inserted into the camera as shown below before use. Micro SD Memory card not included. INSTALLING THE MEMORY CARD: To properly insert the Micro SD Card, follow the instructions below: 1.
POWERING ON – OFF / POWER SAVE TO POWER ON THE CAMERA: Press and hold the Power button for about 2 seconds and release when a beep is heard and the LCD screen turns on. TO POWER OFF THE CAMERA: 1.
Main Camera Modes Short press the Power/Mode button to toggle between the camera modes. Video Capture Mode Use this mode to capture videos with your digital camera. To record a video, please check that the camera is in Video Mode. If the video icon is not displayed on the LCD screen, short press the Power/Mode button until it appears.
Camera Mounts and Accessories It is strongly recommended to use the supplied accessories. It helps to create a better product experience and better shooting/recording effect. WIRELESS REMOTE 1. Power Button 2. Photo Button 3. Video Button 4. Button Indicator (Red) 5.
USING THE TRIPOD Screw the tripod nut attached into the tripod socket on the bottom of the camera. It serves both as a hand-held or fixed device. Fix to use tripod Hold to use tripod...
1. Press and hold the POWER button for about 2 seconds and then release the button to turn on the camera. The LCD screen briefly displays the ‘VIVITAR’ screen and opens to the Video Capture Mode. 2. Press and hold the POWER button again for about 3 seconds to turn the power off.
Vivitar Experience Image Manager Software COMPUTER SYSTEM REQUIREMENTS To be able to download videos and photos to your computer using the ‘Vivitar Experience Image Manager’ Software, you will need the following minimum configuration: WINDOWS OS MICROSOFT® Windows XP with Service Pack 3, Windows Vista with Service Pack 1 or Windows 7 ...
INSTALLING THE SOFTWARE – USING THE CD ROM You must be connected to the Internet to install and run the Vivitar Experience Image Manager Software. 1. Insert the installation CD into your CD-ROM drive. The installation screen should automatically open.
13. On MACINTOSH OS: Click the “Quit” button when the installation is complete. Click the “Launch Vivitar Experience Image Manager” to open the application. 14. If you close the application you can run the Vivitar Experience Image Manager from the Programs (PC) or Applications (Mac) menu on your computer.
On WINDOWS OS the file name is: vivitargeneric_win.exe ON MAC OS in file name is: vivitargeneric_mac.pkg 4. Double click on the downloaded application file to install the Vivitar Experience Image Manager Software. 5. Follow all instructions 6. Once installation is complete, the Vivitar Experience Image Manager opens automatically.
GETTING VIDEOS FROM THE CAMERA TO THE COMPUTER The Micro SD Memory card needs to be inserted. Do not disconnect the cable during transfer. Doing so will cancel the transfer of any files on their way to your computer. 1. Select the “Get Images” button from the Main menu. 2.
Edit images using automatic and manual tools Use automatic “Geotagging” with built in Google Maps For more details on how to use the Vivitar Experience Image Manager open the Help file or click the “Take a Tour” button on the application’s Home screen.
Page 21
MACINTOSH OS 1. Use the supplied USB cable to connect your camera to your computer’s USB port. 2. Power on the camera. 3. The camera’s device icon appears on the desktop. 4. Click on the device icon and open the DCIM folder and the folder inside to view the media files.
Camera Maintenance Please read the information below carefully before using your camera for proper and safe operation, so as to use the camera to its fullest and maintain its performance. MEMORY CARD MAINTENANCE For the first time of using a new memory card, or when there is unrecognized data for the camera or images with other cameras in the memory card, please make sure to firstly format the memory card.
DEVICE MAINTENANCE Take good care of the video camera and prevent water or sand particles from entering the video camera when it is used on the beach or near water. Please note that water, sand particles, dust or component containing salt may damage the video camera. ...
Sakar Warranty Card This warranty covers for the original consumer purchaser only and is not transferable. Products that fail to function properly UNDER NORMAL USAGE, due to defects in material or workmanship will be repaired at no charge for parts or labor for a period of one year from the time of purchase.
Q: I deleted images using the Vivitar Experience Image Manager. The images were also deleted from my computer. How do I recover images that I accidently deleted? All images deleted using the Vivitar Experience Image Manager are sent to your computer’s...