Video Capture - Standard Mode - Vivitar DVR 914HD User Manual

Video Capture – Standard Mode
The Video Capture Mode allows you to capture videos with your digital camcorder.
After powering on your camcorder, the camcorder automatically enters the Video Capture Mode –
either Standard or Car Carrying mode, depending on what mode was last used prior to powering
off your camcorder. If needed, press the POWER / MODE button until the Video Capture icon
appears.
TAKING A VIDEO
1. Selecting the Scene with the LCD Display:
Use the LCD display to direct the camcorder at the scene you would like to capture.
NOTE: The time available for video capture (as per the installed memory card size and
selected resolution) is shown on the top right of the LCD screen.
2. Changing Resolution:
If you would like to change the resolution, press the MENU button and then press the
 DOWN (WIFI) button to select 'Movie Size'. Next, press the SHUTTER/OK button to
view the Movie Size options. Press the  DOWN (WIFI) button to select an option and
then press the SHUTTER/OK button to confirm the option.
The Movie Size options include:
 1440P - 1440P (30fps)
 1080P - 1080P (60fps)
 1080P - 1080P (30fps)
 720P - 720P (120fps)
 720P - 720P (60fps)
 4K -
4K (10fps)
3. Capturing the Video:
 START: Press the SHUTTER/OK button to start the video capture.
The camcorder's LED busy light turns on and blinks. All icons disappear and the
elapsed time appears on the top right corner of the LCD screen along with a blinking
REC
icon
 PAUSE: Press the DOWN (WIFI) button to pause the recording.
 STOP: Press the SHUTTER/OK button again to stop the video recording.
that indicates the recording is in progress.
18