Preset Memory - Panasonic AV-HS300 Operating Instructions Manual

2. Basic operations

2-7. Preset memory

Up to 10 panel settings can be stored in this memory (flash memory).
The table below lists the settings which are stored.
<Table of stored preset memory>
Item
Crosspoint
Wipe
Transition area
Key
User color
STORE: This is used to store the panel settings in the preset memory.
 Press the [FUNC] switch to light its indicator, and then press the [MEM] switch to display the MEM menu.
The PSMEM (1/3) menu appears first.
 Turn [F2], select "STOR" using the MODE item, turn [F3], and set the preset memory number using the NO.
item.
 Press the [F4] switch (EXEC) to store the settings.
ＰＳＭＥＭ ＭＯＤＥ
１／３ ＳＴＯＲ
ＲＥＣＬ
ＣＬＲ
An asterisk ( ) appears at the left of the number when data has been saved in the preset memory.
Description of setting
A bus
B bus
KEY-S
KEY-F
AUX bus
Color background
Wipe pattern
Border width
Soft effect width
Border color
BKGD/KEY selection
MIX/WIPE selection
Auto transition time (BKGD)
Auto transition time (KEY)
Key type (TYPE)
Key adjustment (ADJ)
Inversion ON/OFF
Fill color
Edge color
Edge ON/OFF (TYPE)
Edge width
User color 1 (HUE, SAT, LUM)
User color 2 (HUE, SAT, LUM)
User color 3 (HUE, SAT, LUM)
User color 4 (HUE, SAT, LUM)
ＮＯ．
＊１０
１－１０
1
2
4
5
1
WHITE
4 (center)
4 (TBD)
4 (TBD)
YLW
BKGD
MIX
60F
60F
LIN
GAIN: 100 (TBD)
CLIP: 50 (TBD)
DENS: 100 (TBD)
OFF
GRN (TBD)
YLW (TBD)
OFF
4 (TBD)
0, 0, 100 (TBD)
355, 100, 7 (TBD)
50, 100, 29 (TBD)
0, 0, 0 (TBD)
ＥＸＥＣ
24
Initial value (factory default)