Event Id Code List - Epson PowerLite Pro Cinema 4040 User Manual

Note: Available settings depend on the current input source. The lamp usage timer does not register any
hours until you have used the lamp for at least 10 hours.
Projector Info information
Information item
Lamp Hours
Source
Input Signal
Resolution
Scan Mode
Refresh Rate
3D Format
Sync Info
Color Depth
Color Format
Status
Serial Number
Event ID

Event ID Code List

Parent topic:
Related tasks
Replacing the Lamp
Resetting the Lamp Timer
Event ID Code List
If the Event ID option on the Info menu displays a code number, check this list of Event ID codes for the
solution to the projector problem associated with the code.
Description
Displays the number of hours (H) the lamp has been used
Displays the name of the port to which the current input source is
connected
Displays the input signal setting of the current input source
Displays the resolution of the current input source
Displays the scan mode of the current input source
Displays the refresh rate of the current input source
Displays the format of the 3D signal
Displays information that may be needed by a service technician
Displays the color depth and color difference
Displays information about the color space and dynamic range
Displays information about projector problems that may be needed
by a service technician
Displays the projector's serial number
Displays the Event ID number corresponding to a specific projector
problem; see the list of Event ID codes
Adjusting the Menu Settings
107