Using The Projector On A Network; Wired Network Projection; Connecting To A Wired Network - Epson PowerLite Pro Cinema 4040 User Manual

Using the Projector on a Network

Follow the instructions in these sections to set up your projector for use on a network.

Wired Network Projection

Wireless Network Projection
Selecting External Network Detection Settings
Wired Network Projection
You can project through a wired network. To do this, you connect the projector to your network, and then
set up your projector and computer for network projection.
After connecting and setting up the projector as described here, install the network software from the
included CD or download the software and manuals as necessary.
Note: If your projector is connected via a LAN cable to a network that includes a wireless access point,
you can connect to the projector wirelessly through the access point using the Epson network software.

Connecting to a Wired Network

Selecting Wired Network Settings
Parent topic:
Related references
Additional Projector Software and Manuals
Connecting to a Wired Network
To connect the projector to a wired local area network (LAN), use a 100Base-TX or 10Base-T network
cable. To ensure proper data transmission, use a Category 5 shielded cable or better.
1. Connect one end of the network cable to your network hub, switch, or router.
2. Connect the other end of the cable to the projector's LAN port.
Parent topic:
Using the Projector on a Network
Wired Network Projection
34