FujiFilm FINEPIX F480 Owner's Manual page 115

Z Connecting
Matters
There is no image
or sound on the
TV.
Connecting to TV
The TV image is
black and white.
PC does not
Connecting to PC recognize the
camera.
Connecting to Cannot print with
printer PictBridge.
Downloaded From camera-usermanual.com Fujifilm Manuals
Problems Possible causes
The camera is not connected to the TV
correctly.
The included video cable or A/V cable was
connected during movie playback.
"TV" is selected as the TV input.
The video output setting is incorrect.
The TV volume is turned down.
The video output setting is incorrect.
The USB cable is not correctly connected
to the PC or camera.
• The USB cable is not correctly
connected to the printer or camera.
• The printer is not turned on.
Solutions
Connect the camera and TV correctly.
After the movie playback mode is
stopped, connect the camera and TV
correctly.
Set the TV input to "VIDEO".
Change the setting to [NTSC] or [PAL].
Adjust the volume.
Change the setting to [NTSC] or [PAL].
Set up the camera, and connect the USB
cable correctly.
• Set up the camera, and connect the
USB cable correctly.
• Turn the printer on.
Continued Q
Page
87
76, 87
–
78, 80
–
78, 80
97
88
115