Monochrome Lcd Screen - Casio WSD-F10 User Manual

Monochrome LCD Screen

Your watch has a dual-layer color and monochrome LCD. Switching between
monochrome and color LCD screens can be performed manually, but it is
also performed automatically in certain cases. The following section explains
when the watch displays the monochrome LCD screen.
After entering the Timepiece Mode
The watch will use the monochrome LCD screen to display the current time
after you enter the Timepiece Mode by running the Timepiece app (see
the Timepiece App").
Display
Important!
Android Wear operation stops whenever the watch charge level starts to
●
approach 0%. For a while after that happens, the watch will automatically
switch to the monochrome LCD screen that appears in Timepiece Mode.
The watch's power button is completely disabled at this time. Charge the
watch as soon as possible when this happens. Android Wear will
automatically resume operation after the charge reaches a certain level.
The operations described below
●
can be performed in the
Timepiece Mode.
Pressing (and immediately
releasing) the power button:
Turns on the backlight.
Holding down the power button:
Exits the Timepiece Mode and
starts up Android Wear.
The watch does not perform any
●
notification operations while in the
Timepiece Mode.
EN-109
Operations
"Using