Casio WSD-F10 User Manual page 19

Adjust
brightness
Change watch
face
Font size
Gestures
Always-on
screen
Wi-Fi
Bluetooth
Airplane mode
Accessibility
Date & time
Screen lock
Lock screen now
Permissions
Unpair with
phone
Restart
Power off
About
Use this setting to select a value that sets the touch
screen brightness.
Use this setting to select the watch face that appears
on the Home Screen.
Use this setting to select one of three system font sizes.
Specifies whether or not watch operations can be
performed by rotating the wrist.
When this setting is turned OFF, the watch face will
change from a color screen to a monochrome screen
after a period of non-use.
Toggles the Wi-Fi setting between "Automatic" and
"OFF". When Wi-Fi is enabled, you can also configure
Wi-Fi settings.
Pairs with and unpairs from a nearby Bluetooth
terminal.
Toggles the Airplane mode between ON and OFF.
Toggles zoomed screen operation between enabled
and disabled. When this setting is enabled, tapping the
touch screen three times in succession will zoom at the
tapped location. Tapping three times in succession
again will return the screen to normal size.
Specifies whether or not to sync the watch settings with
the smartphone's date, time, and time zone settings.
Use this setting to select "Automatic" or "OFF" for
screen lock. When screen lock is enabled, the watch
will go to sleep and lock some time after you remove it
from your wrist. To unlock the watch after it goes to
sleep, you need to draw the unlock pattern you
specified when you enabled screen lock.
This item is available only when "Automatic" is
selected for "Screen lock". Selecting "Lock screen
now" immediately puts the watch to sleep.
Configures settings for rights to access each app.
Deletes the pairing settings of the currently connected
smartphone and restores watch settings to their initial
factory defaults.
Restarts the watch.
Turns off watch power.
Displays the following information about the watch:
software version, serial number, regulatory
information, etc.
EN-17