Getting Ready; Charge Led - Casio WSD-F10 User Manual

Getting Ready

After reading the "Safety Precautions" in the "Quick Start Guide", perform the
steps below. Before using this watch for the first time, perform steps 1.
through 4. below in sequence.
1. Charge the Watch
1.
Connect the provided charger cable to the AC adaptor, and then plug
the AC adaptor into a power outlet.
2.
Connect the charger cable to the watch charger terminal.
The watch's charge LED lights red while charging is in progress.
●
The LED changes to green when the watch is fully charged.
The watch will turn on automatically when the charge reaches a
●
certain level.
AC adaptor*
* The shape of the AC adaptor supplied in your geographic area may be
different from the one shown in the illustration.
Important!
To help promote longer battery life, regular charging of the watch (about
●
once a month) is recommended even if you do not use it for a long time.
Note
After getting ready for operation, use the procedure above to fully charge
●
the watch whenever the battery runs low during normal operation.

Charge LED

EN-9