Table of Contents
Advertisement
Contents
Connections
Symptom
While the menu is being
0
displayed, no video is
shown on the TV.
When using HDMI ZONE2,
0
the video output in MAIN
ZONE is interrupted.
o The menu screen is not displayed on the TV
Symptom
The menu screen or status
0
information screen is not
displayed on the TV.
0
0
0
0
Front panel
Display
Playback
The video being played will not appear in the background of the menu when the menu is operated during
playback of the following video signals.
- Some images of 3D video contents
- Computer resolution images (example: VGA)
- Video with an aspect ratio other than 16:9 or 4:3
- 4K video
When ZONE2 is operated with the same input source selected for MAIN ZONE and ZONE2, video in
MAIN ZONE may be interrupted.
The menu screen is only displayed on this unit and a TV connected with an HDMI cable. If this unit is
connected to a TV using a different video output connector, operate while watching the display on this
unit.
The status information will not appear on the TV when the following video signals are being played.
- Some images of 3D video content
- Computer resolution images (example: VGA)
- Video with an aspect ratio other than 16:9 or 4:3
When a 2D video is converted to a 3D video on the TV, the menu screen or status information screen is
not displayed properly.
In the pure direct playback mode, the menu screen or status information is not displayed. Switch to a
sound mode other than the pure direct mode.
Set the "TV Format" setting in the menu to a selection that is appropriate for the TV.
Rear panel
Settings
Cause / Solution
Cause / Solution
293
Remote
Tips
Appendix
Page
Page
Index
－
－
－
266
266
146
209
Advertisement
Table of Contents
