Tv Format - Marantz SR7011 Owner's Manual

Hide thumbs Also See for SR7011:

Table of Contents

TV Format

Set the video signal format to be output for the TV you are using.

0 "Format" can also be set by the following procedure. However, the menu

screen is not displayed. Following the display content to make the setting.

1. Press and hold the main unit's STATUS and ZONE SELECT at the same

time for at least 3 seconds.

"Video Format <NTSC>" appears on the display.

2. Use the main unit's o or p and set the video signal format.

3. Press the main unit's ENTER to complete the setting.

0 When a format other than the video format of the connected TV is set, the

picture will not be displayed properly.

Select NTSC output.

Select PAL output.