The Menu Screen Is Not Displayed On The Tv - Marantz SR5008 Owner's Manual

Contents
Symptom
No video is shown on the TV with the
DVI-D connection.
No video from an input source such
as a game console is shown on the
TV.
While the menu is being displayed, no
video is shown on the TV.

2 The menu screen is not displayed on the TV

Symptom
The menu screen or status
information screen is not displayed on
the TV.
Front panel Display
Connections Playback
• With the DVI-D connection, on some device combinations, devices may not function properly
due to the copy guard copyright protection (HDCP).
• When special video signals are input from a game console, etc., the video conversion function
may not function. Connect the input connector to the monitor output connector of the same
type.
• When the menu is operated during playback of some 3D video contents or of video at some
computer resolutions (such as VGA), no playback video is shown in the background of the
menu.
• The menu screen is only displayed on this unit and a TV connected by HDMI cable. If this unit
is connected to a TV using a different video output connector, operate while watching the
display on this unit.
• No status information is displayed for some 3D videos or videos with a computer resolution
such as VGA.
• When a 2D video is converted to a 3D video on the TV, the menu screen or status information
is not properly displayed.
• In the pure direct playback mode, the menu screen or status information is not displayed.
Switch to a sound mode other than the pure direct mode.
• Set the "TV Format" setting in the menu to a selection that is appropriate for the TV.
Rear panel
Settings
Cause / Solution
Cause / Solution
194
Remote
Tips Appendix
Page
Page
108, 109
Index
203
–
–
–
180
–
153