On Screen Display; Tv Format - Marantz NR1604 Owner's Manual

Contents

On Screen Display

Select the on-screen display user interface preferences.
2 Volume
Sets where to display the master volume level.
Bottom (Default) : Display at the bottom.
Top : Display at the top.
Off : Turn display off.
%
• When the master volume display is hard to see when superimposed text
(closed captioning) or movie subtitles are present, set to "Top".
2 Info
Displays status of operation temporarily when the sound mode is
changed, or input source is switched.
On (Default) : Turn display on.
Off : Turn display off.
2 Now Playing
Sets the display time for the playback display when the input source is
"NETWORK", "iPod/USB" or "TUNER".
Always On (Default) : Show display continuously.
Auto Off : Show display for 30 seconds after operation.
Front panel Display
Connections Playback
Rear panel
Settings

TV Format

Set the video signal format to be output for the TV you are using.
2 Format
PAL (Default) : Select PAL output.
NTSC : Select NTSC output.
%
• "Format" can also be set by the following procedure. However, the menu
screen is not displayed.
1. Press and hold the main unit's ZONE2 SOURCE and STATUS for at least 3
seconds.
"V.Format:<PAL>" appears on the display.
2. Use the main unit's ZONE2 SOURCE or INTERNET RADIO and set the video
signal format.
3. Press the main unit's STATUS to complete the setting.
NOTE
• When a format other than the video format of the connected TV is set, the
picture will not be displayed properly.
147
Remote
Tips Appendix
Index