Date And Time, Your Name And Facsimile Telephone Number - Panasonic KX-FP270 Operating Instructions Manual

Date and time, your name and facsimile
telephone number
You should program the date and time, your logo and facsimile telephone number. This information will be
printed on each page transmitted from your unit, fulfilling the requirements of the Telephone Protection Act of 1991.
Your logo
Example:
FROM : Panasonic Fax
Setting the date and time
1
Press MENU .
Display:
2
Press , then 0 1
3
Press START/COPY/SET
4
Enter the correct month/day/year by selecting
each 2 digits using the dial keypad or
If using
JOG DIAL
cursor.
Example (using the dial keypad): Aug. 10, 1998
Press 0 8 1 0
5 Press
START/COPY/SET
6
Enter the correct hour/minute by selecting each
2 digits using the dial keypad or
If using
JOG DIAL
cursor.
Press to select "AM" or "PM".
Example (using the dial keypad): 3:15PM
0 3 1 5
1. Press
2. Press until "PM" is displayed.
Your facsimile telephone number
FAX NO. : 1234567
Fax Correspondence
1.SYSTEM SET UP
.
SET DATE & TIME
.
M:01/D:01/Y:98
Cursor
JOG DIAL
, press to move the
9 8 .
M:08/D:10/Y:98
.
TIME: 12:00AM
JOG DIAL .
, press to move the
.
TIME: 03:15AM
TIME: 03:15PM
Feb. 26 1998 04:02PM
7
Press START/COPY/SET
8
Press MENU
Dial keypad
.
STOP
START/COPY/SET
Note:
The key can be used to select "AM" or
"PM" wherever the cursor is located.
The accuracy of the clock is approximately
±60 seconds a month.
To correct a mistake
Press or
incorrect number, then make the correction.
If you press STOP
display will return to the previous one.
Setup
Date and time
P1
.
SETUP ITEM [ ]
.
MENU
/
JOG DIAL
to move the cursor to the
while programming, the
29