Panasonic kx-taw848 Programming Manual page 13

Entering System Programming Mode
Using a PT to perform system programming allows an authorized extension user to set a wide range
of PBX features and parameters.
There are two levels of system programming that can be performed with a PT: administrator level
programming and user level programming.
Administrator Level:
All system programming that can be performed with a PT is accessible.
PROGRAM/
PAUSE
User Level:
System programming that has been made accessible to PT users through PC programming can be
performed.
PROGRAM/
PAUSE
Note
means default value throughout this manual.
Programming Structure
Programming
Number
[0XX]
[1XX]
[2XX]
[3XX]
[4XX]
[5XX]
[6XX]
[7XX]
[8XX]
[9XX]
System Password for Administrator
#
—for PT Programming
= 1234
System Password for User
—for PT Programming
= 1234
Programming Group Title
Basic Programming
System Management
Programming
Timer Programming
TRS/ARS Programming
CO Line Programming
COS Programming
Extension Programming
Resource/Interface
Programming
SMDR & Maintenance
Programming
Card Programming
Programming No.
3 digits
Programming No.
3 digits
Description
Frequently used programming steps
Global system parameters
System timers
Toll Restriction (TRS) and Automatic Route
Selection (ARS) programming
CO line and trunk group settings
Class of Service parameters
Extension feature settings
PBX interface and external device settings
Station Message Detail Recording (SMDR) and
maintenance feature settings
Used to display the cards currently installed in
the PBX, or to "delete" a card from system
programming before physically removing it.
PT Programming Manual
2.1 PT Programming
13