Remove The Sc-Board; Remove The Ss-Board; Remove The Stand Brackets; Remove The C1-Board - Panasonic TH-50PZ700U Service Manual

6.14. Remove the SC-Board

1. Unlock the cable clampers to free the cable.
2. Remove the SU-Board and SD-Board. (See section 6.12.
and 6.13.)
3. Unlock the cable clampers to free the cable.
4. Disconnect the connectors (SC2, SC20 and SC23).
5. Remove the screws (×9

6.15. Remove the SS-Board

1. Disconnect the connectors (SS11, SS12, SS34, SS35,
SS42 and SS44).
2. Disconnect the flexible cables (SS51, SS52, SS53, SS54,
SS55 and SS56).
3. Remove the screws (×7
) and remove the SC-Board.
) and remove the SS-Board.

6.16. Remove the stand brackets

1. Remove the plasma panel section from the servicing stand
and lay on a flat surface such as a table (covered) with the
plasma panel surface facing downward.
2. Remove the stand brackets (left, right) fastening screws (×5
each) and remove the stand brackets (left, right).

6.17. Remove the C1-Board

1. Remove the fans. (See section 6.2.)
2. Remove the flexible cables holder fastening screws (×10
).
3. Disconnect the flexible cables (CA1, CA2, CA3, CA4, and
CA5).
4. Disconnect the flexible cables (C10 and C11).
5. Remove the screws (×5

6.18. Remove the C2-Board

1. Remove the fans. (See section 6.2.)
2. Remove the flexible cables holder fastening screws (×10
).
3. Disconnect the flexible cables (CA6, CA7, CA8, CA9 and
CA10).
4. Disconnect the flexible cables (C21, C22, C24 and C25).
5. Remove the screws (×5
15
TH-50PZ700U / TH-50PE700U
) and remove the C1-Board.
) and remove the C2-Board.