TH-50PZ700U / TH-50PE700U
6.10. Remove the PB-Board
1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (PB30, PB31, PB32, PB35 and
PB37).
3. Remove the screws (×2
unit.
4. Remove the screw (×1
6.11. Remove the D-Board
1. Remove the PB-Board unit. (See section 6.10.)
2. Disconnect the connectors (D3, D5, D20 and D25).
3. Disconnect the flexible cables (D31, D32, D33, D34, D35
and D36).
4. Remove the screws (×4
) and remove the PB-Board
) and remove the PB-Board.
) and remove the D-Board.
6.12. Remove the SU-Board
1. Remove the screws (×2
2. Remove the flexible cables (SU1, SU2, SU3, SU4 and SU5)
connected to the SU-Board and remove the connectors
(SC45-SU45).
3. Slide the SU-Board to the left to disconnect from
connectors (SC41-SU41 and SC42-SU42) on the SC-Board
and remove the SU-Board.
6.13. Remove the SD-Board
1. Remove the speaker box assy right. (See section 6.9.)
2. Remove the screws (×2
3. Remove the flexible cables (SD1, SD2, SD3, SD4 and SD5)
connected to the SD-Board and remove the connector
(SC46-SD46).
4. Slide the SD-Board to the left to disconnect from
connectors (SC43-SD43 and SC44-SD44) on the SC-Board
and remove the SD-Board.
14
).
).