If A Power Failure Occurs - Panasonic KX-FLB753HK Operating Instructions Manual

Panasonic flat-bed multi-function laser fax operating instructions
Table of Contents

Advertisement

Operations
The document does not feed into the fax
machine.
L Remove the document and reinsert it.
[ Cancel ] , scanning
Even after clicking
continues.
L Please wait. It may take a while for the cancel
request to be accepted.
Multi-Function Station does not work
properly.
L Click the [ X ] button to exit Multi-Function
Station, and restart. If Multi-Function Station
still does not close, restart the PC.
L If you connect the USB cable to USB hub,
connect it to the USB port of your computer
directly.
L Confirm the BIOS setting of your computer.
For parallel connection, select ECP , Bi-
directional or an equivalent parallel port
mode. For USB connection, select USB port
mode. Please refer to your PC operating
instructions or consult the manufacturer.
L If you have any other multifunction softwares
installed on your computer, uninstall them.

If a power failure occurs

L The unit will not function.
L The unit is not designed for making emergency telephone calls when the power fails. Alternative
arrangements should be made for access to emergency services.
L Fax transmission and reception will be interrupted.
L If any fax documents are stored in the memory, they will be lost. When power is restored, a power
down report will be printed out stating which contents in the memory have been erased.
- 74 -
I want to replace the parallel cable with a USB
cable and vice versa.
L You must change the printer properties.
1. Replace the cables.
2. Set the connection type (parallel or USB)
by using the fax machine according to the
cable type you use (feature #15 on page
64).
[ Start ] , point to [ Settings ] , then
3. Click
[ Printers ] .
click
[ Panasonic FLM551/FLB751
4. Right-click
] and click [ Properties ] . The
Series
[ Panasonic FLM551/FLB751 Series
] dialogue box will appear.
Properties
[ Details ] (Windows
5. Click the
[ Ports ] (Windows 2000) tab,
98/Me)/
select the connection type, then click
[ OK ] . If Multi-Function Station does not
work correctly, uninstall the software,
then re-install it.

Advertisement

Table of Contents
loading

Table of Contents