Table of Contents
Advertisement
Receiving Faxes
TEL mode (answering all calls manually)
Activating TEL mode
{STOP}
{FAX START}
OFF
If the FAX ON light is on, turn it off by pressing
{ AUTO ANSWER } .
Receiving a fax manually
1
When the unit rings, lift the handset to
answer the call.
2
When:
– document reception is required,
– a fax calling tone (slow beep) is heard,
or
– no sound is heard,
{ FAX START } .
press
3
Replace the handset.
L The unit will start fax reception.
Note:
L If you do not answer the call within 15 rings,
the unit will temporarily switch to fax
reception. The other party can then send a
fax.
- 44 -
TEL MODE
CONNECTING.....
To stop receiving
{ STOP } .
Press
Auto reduction feature
If the other party sends a document that is longer
than your recording paper, your unit will reduce
the receiving document to the proper size and
print it. If you want to print the original size, set
feature #37 to off (page 66).
Fax reception in memory
When a printing problem is detected, the unit will
temporarily store the received document into
memory. While the document is in memory:
– The display will show an error message and
the following alternately.
– Slow beeps will sound if feature #44 is set to
on (page 67).
L Follow the instructions on page 69 to solve
the problem.
L For memory capacity, see page 85.
FAX IN MEMORY
Advertisement
Table of Contents
