Table of Contents
Advertisement
Features Summary
Basic
features!
How to set the basic features
1. Press p.
2. Press ( or ) until the desired feature
is displayed.
3. Press + or - until the desired setting is
displayed.
4. Press w.
5. Press p.
Programming table
For the settings column, the bold type indicates the default setting.
Code
Feature & Display
Setting the date and time
#01
SET DATE & TIME
PRESS SET
Setting your logo
#02
YOUR LOGO
PRESS SET
Setting your facsimile telephone
number
#03
YOUR FAX NO.
PRESS SET
Printing the sending report
SENDING REPORT
=ERROR
#04
To print and check the sending
report for fax transmission results
(p. 33).
Changing the ring setting in FAX
ONLY mode
FAX RING COUNT
RINGS=2
#06
To change the number of rings
before the unit answers a call in
FAX ONLY mode.
58
Settings
ERROR
[±]
ON
OFF
2, 3, 4, 5, 6,
[±]
7, 8, 9
Note:
Step 3 may be slightly different depending on the
feature.
See page 57 for more details.
How the unit operates
See page 19 for details.
See page 20 for details.
See page 22 for details.
"ERROR": The sending report will
be printed only when fax
transmission fails.
"ON": The sending report will be
printed out after every transmission.
If you are using the unit with an
answering machine, set to more
than 4 (p. 44).
Advertisement
Table of Contents
