Table of Contents
Advertisement
Setup
Toner cartridge and drum
Caution:
Read the instructions below before you begin installation. After you have read them,
open the drum unit protection bag. The drum unit contains a photosensitive drum.
Exposing it to light may damage the drum. Once you have opened the protection bag:
— Do not expose the drum unit to light for more than 5 minutes.
— Do not touch or scratch the green drum surface.
— Do not place the drum unit near dust or dirt, or in a high humidity area.
— Do not expose the drum unit to direct sunlight.
Do not leave the toner cartridge out of the protection bag for a long time. It will decrease
the toner life.
Before opening the protection bag of
1
the new toner cartridge, shake it
vertically more than 5 times.
Remove the toner cartridge and drum
2
unit from the protection bags. Peel off
the seal from the toner cartridge (
Remove the protection bar from the
$
drum unit (
3
With "Panasonic" face up on the
toner cartridge, match the red arrows
on the cartridge and the drum unit.
4
Slide the tab on the toner cartridge
into the slot of the drum unit.
5
Firmly press down on the right side of
the toner cartridge to snap into
position.
14
#
).
unit!
1
Seal
).
Toner
cartridge
Hold here.
Red arrows
Drum unit
Protection bar
2
Drum unit
Toner
cartridge
Green drum
surface
Tab
Slot
Advertisement
Table of Contents
