Table of Contents
Advertisement
Connecting to a
Panasonic Multi-Function Station software enables your fax machine to carry out the following
functions:
— Printing on plain paper, transparencies, labels and envelopes
— Scanning documents and converting an image into text with Readiris OCR software
— Scanning from other Microsoft
— Storing, editing or erasing entries in directories from your PC
— Programming the basic and advanced features from your PC
To run Multi-Function Station software, you need the following:
— Compatible OS:
— CPU:
— Memory minimum: Windows 95/98: 24 MB (32 MB or more is recommended.)
— Hard disk:
— Other:
When using an IEEE1284 compliant parallel cable:
Parallel cable (amphenol 36 pin) must be purchased separately.
When using a USB cable (Windows 95 does not offer USB support):
USB cable must be purchased separately.
After connecting the USB cable, you must set the cable type to "USB" (feature #15
on page 59).
Note:
If you want to replace the parallel cable with a USB cable and vice versa, see page 69.
computer!
®
Windows
Windows 95/98/Me/2000
Windows 95/98: Pentium
Windows Me:
Pentium 150 MHz or higher processor
Windows 2000: Pentium 166 MHz or higher processor
Windows Me:
32 MB (64 MB or more is recommended.)
Windows 2000: 64 MB
More than 40 MB available space
Parallel (IEEE1284) port or USB port, and CD-ROM drive
®
applications that support TWAIN scanning
®
90 MHz or higher processor
Setup (PC)
49
Advertisement
Table of Contents
