Specifications - Panasonic KX-FL313HK Operating Instructions Manual

9. General Information

Specifications

9.2 Specifications
Applicable lines:
Public Switched Telephone Network
Document size:
Max. 216 mm in width, Max. 600 mm in length
Effective scanning width:
208 mm
Effective printing width:
202 mm
*1
Transmission time :
Approx. 8 s/page (ECM-MMR)
Scanning density:
Horizontal: 8 pels/mm
Vertical: 3.85 lines/mm-in standard resolution,
7.7 lines/mm-in fine/photo/mixed (photo with text)
resolution,
15.4 lines/mm-in super fine resolution
Photo resolution:
64-level
Scanner type:
Contact Image Sensor
Printer type:
Laser Printer
Data compression system:
Modified Huffman (MH), Modified READ (MR), Modified
Modified READ (MMR)
Modem speed:
14,400 / 12,000 / 9,600 / 7,200 / 4,800 / 2,400 bps;
Automatic Fallback
Operating environment:
10 °C – 32.5 °C, 20 % – 70 % RH (Relative Humidity)
Dimensions:
Approx. height 218 mm × width 360 mm × depth 357 mm
Mass (Weight):
Approx. 7.4 kg
Power consumption:
Standby: Approx. 3 W
Transmission: Approx. 12 W
Reception: Approx. 240 W
Copy: Approx. 240 W
Maximum: Approx. 950 W (When the fuser lamp turns
on)
Power supply:
220 – 240 V AC, 50/60 Hz
Fax memory capacity:
Approx. 150 pages of memory transmission
Approx. 40 pages of memory reception
(Based on the ITU-T No. 1 Test Chart in standard
resolution.)
Laser diode properties:
Laser output: Max. 5 mW
Wave length: 760 nm – 800 nm
Emission duration: Continuous
64
*2
Print speed:
Approx. 10 ppm (pages per minute)
Printing resolution:
600 × 600 dpi
*1 Transmission speed depends upon the contents of
the pages, resolution, telephone line conditions and
capability of the other party's machine.
*2 Transmission speed is based upon the ITU-T No. 1
Test Chart. If the capability of the other party's
machine is inferior to your unit, the transmission time
may be longer.
ITU-T No.1 Test Chart
Note:
L Design and specifications are subject to change
without notice.
L The pictures and illustrations in these instructions
may vary slightly from the actual product.