Supermicro SUPERSERVER 2048U-RTR4 User Manual page 60

S S
UPER ERVER 2048U-RTR4 User's Manual
Jumper Description
JBT1 Clear CMOS/Reset BIOS Configuration
JPG1 VGA Enable/Disable
JPME2 Manufacture (ME) Mode Select
JPT1 Trusted-Platform Module (TPM) Enable/Disable
J13 Power Fail Trigger Thermal Throttle
JWD1 Watch Dog
Note: Jumpers not indicated are for test purposes only.
Connector
Battery (JBAT1)
COM1
FAN1-FAN10
J3/J12
JF1
JIPMB1
JL1
JNVI C3/4
2
JPWR1-3
JPWR4-7
JSD1/JSD2
JSTBY1
JTPM1
(IPMI) LAN
I-SATA0-3
I-SATA4/5
S-SATA0-3
(CPU3) Slot1
(CPU4) Slot1
SP1
SXB2
SXB1A/1B/1C
SXB3A/3B/3C
T-SGPIO2
UID
USB0/1 (2.0)
USB2/3 (3.0)
USB4 (3.0)
USB 5/6 (3.0)
VGA
Description
Onboard CMOS battery
Backplane COM port
System Cooling Fan Headers
Main Power Connection Headers
Front Control Panel Header
4-pin External BMC I C Header (for IPMI card)
2
Chassis Intrusion Header
System Management Bus (for memory headers JP12/JP11)
8-pin Power Connectors (for backplane)
8-pin Power Connectors (for GPU devices)
SATA DOM (Disk On Module) Power Connectors
Standby Power Header
TPM (Trusted Platform Module)/Port 80 Header
Dedicated IPMI LAN Port
I-SATA 0-3 Ports (supported by Intel PCH)
I-SATA 4/5 Ports (with built-in power pins)
S-SATA 0-3 Ports (supported by Intel PCH)
PCI-E 3.0 x16 Slot (for Supermicro add-on card)
PCI-E 3.0 x16 Slot (for Supermicro add-on card)
Internal buzzer/speaker
PCI-E 3.0 x8 in x16 Slot (supported by CPU1)
PCI-E 3.0 x32 Slot
PCI-E 3.0 x40 Slot (supported by CPU2)
Serial Link General Purpose I/O (SGPIO) Header for I-SATA4/5
UID (Unit Identifier) Switch
Front-accessible USB 2.0 Headers
Backpanel USB 3.0 Ports
Type A USB 3.0 Header
Front-accessible USB 3.0 Header
Backpanel VGA Port
5-12
Default Setting
See Section 5-9
Pins 1-2 (Enabled)
Pins 1-2 (Normal)
Pins 1-2 (Enabled)
Pins 2-3 (Enabled)
Pins 1-2 (Reset)