Rear view
Figure 2. Rear view
1
USB 3.0 connector
3
Headphone connector
5
®
DisplayPort
connector
7
DisplayPort connector
9
Security-lock slot
11
Ethernet connector
13
Wi-Fi antenna slot
Note: The USB 3.0 connector
computer or wake it up from S4 hibernation mode by pressing Alt+P on the keyboard. You can enable or
disable the smart power on feature from the Setup Utility program. For detailed information, see "Enabling or
disabling a device" on page 35.
• DisplayPort connector
Used to connect a high-performance monitor, a direct-drive monitor, or other devices that use a
DisplayPort connector.
• Ethernet connector
Used to connect an Ethernet cable for a local area network (LAN).
Note: To operate the computer within Federal Communications Commission (FCC) Class B limits, use a
Category 5e or better Ethernet cable.
4
supports the smart power on feature that enables you to turn on the
2
USB 3.0 connector
4
USB 3.0 connector
6
USB 3.0 connector
8
power adapter connector
10
Optional connector (available on some models)
12
Padlock loop
.
Chapter 1
Product overview
3