TP-Link TL-ER604W User Manual page 78

The following items are displayed on this screen:
 Static Route
Destination:
Subnet Mask:
Next Hop:
Interface:
Metric:
Description:
Status:
List of Rules

You can view the information of the entries and edit them by the Action buttons.
The first entry in Figure 3-47 indicates: If there are packets being sent to a device with IP address of
211.162.1.0 and subnet mask of 255.255.255.0, the Router will forward the packets from WAN1 port to
the next hop of 211.200.1.1.
Figure 3-47 Static Route
Enter the destination host the route leads to.
Enter the Subnet Mask of the destination network.
Enter the gateway IP address to which the packet should be sent next.
Select the physical network interface, through which this route is
accessible.
Defines the priority of the route. The smaller the value is, the higher the
priority is. The default value is 0. It is recommended to keep the default
value.
Give a description for the entry.
Activate or inactivate the entry.
-73-