Unitron max Quick Reference

Max
Unitron TrueFit quick reference fitting guide
Max offers max power and max protection. Max is the only Super Power
™
on the market with Power Adaptation Manager to provide the first fit that
clients expect, gently and automatically transitioning them to safer gain
levels that will protect their hearing in the end. Powered by Era,
offers features that are optimized for severe to profound hearing loss and
focused on maximizing intelligibility without compromising awareness.
Fight over-amplification and provide the best possible long term hearing
outcomes with Max.
Programming Max in Unitron TrueFit software
This quick reference guide will lead you through the steps of a simplified
fitting for Max hearing instruments using Unitron's TrueFit
software.
To detect the hearing instrument(s), choose your desired programming
interface.
• If using iCube, insert the batteries into the hearing instruments and
close the battery door.
• If using NOAHlink or HI-PRO, lift the programming port cover and insert
the programming cable into the programming port.
Note: Hearing instrument controls, accessories, easy-t, easy-DAI, audio streaming and
automatic microphone options are deactivated during programming.
1. Client
NOAH
Within Client, click on Experience Level and
enter the client's experience level with hearing
instruments.
Standalone
a. Information
Within Client, click on Information. Click the New
Client button, enter the client's information and
click Save. Click the Blank Session button to begin
a new session.
b. Experience Level
Within Client, click on Experience Level, enter the client's experience
level with hearing instruments.
c. Audiogram
Within Client, click on Audiogram, enter the client's audiogram and
select the transducer used for audiometry.
Max
™
fitting
™
Select the client's hearing instrument experience level.
When using iCube, insert
the battery into the
battery compartment.
When using NOAHlink
or HI-PRO, insert the
programming cable
into the hearing
instrument.