Panasonic TU-HDT105A Operating Instructions Book Manual page 28

Operating Instruction Book
TU-HDT105A
Digital TV or some channels (services) may not have yet commenced in your area.
There are some towns a
some towns and regio
can check the d igital cov
(www.dba.org.au/reception).
Signal Strength
The signal received m
available channels.
Your old antenna may n
Antenna reception
connections / cabling
If you live within 5-10Km of DTV transmission towers, a
should be adequate. Outside this area, separate VHF and UHF antennas provide superior
reception performance.
Depending on DTV sign
masthead amplifier.
In a shared antenna system the existing Master Antenna TV (MATV) system may have
been originally designed for analogue PAL TV only, and may require a substantial upgrade
or replacement to also carry DTV signals. Please consult your Body Corporate
F or your safety any external aerial should be installed by a reputable qualified installer and
should comply with Australian Standard AS1
S ome channels display 'No Signal' or 'Loss of Signal'
R eceived signal is "too weak" (i.e.; poor quality) to generate a stable picture
Please check antenna & cabling or contact your local TV antenna installer.
P icture regularly breaks up on some channels
The received signal may be too weak to allow the digital TV receiver to reliably "lock" to the
desir ed signal and generate a stable
Please check antenna & cabling or contact your local TV antenna installer.
28
nd regions in Au
ns not all broadcasters h
erage for your area at the Rece
ay be too po or to allow the digital receiver to find some or all
ot be designed to receive al
perfo rmance has deteriorated
and broken elements.
al conditions, some in
picture.
stralia that cannot yet receive digital television. In
ave comm enced their digital services. You
ption Locator on
l DT V channels.
due t o weathering, corrosion of antenna
combined VHF/UHF antenna
stallations may instead require a VHF/UHF
417.1.
the DBA website
.