Panasonic TU-HDT105A Operating Instructions Book Manual page 20

Operating Instruction Book
TU-HDT105A
Audio Mode Priority
The Audio mode allows you to adjust the audio setting. You may choose Dolby
Digital (Dolby D), MPEG1 and MPEG2. Use
Audio Language Priority setting, this audio mode setting determines your initial
choice of soundtrack based on the audio mode, and you may select any soundtrack
channel by channel, regardless of the audio mode setting made in this menu.
If the default Audio Mode is Dolby D, and the input signal contains only MPEG2, the
default Mode wi
D, the digital receiver will automatically select a Dolby D soundtrack when it is
available.
We especially recommend this
TV or A/V receiver that can decode Dolby Digital (look
Surround Pro Logic (look for the
Digita l Audio
For each Audio Mode, you can have different D
(Refer to Table 2, Digital Audio Selection Table)
Table 2: Digital Audio Selection Table
Default Audio Mode
Dolby Digital
MPEG-2
MPEG-1
*Bitstream: select this if your TV or A / V receiver has a digital audio input and can decode
o
Dolby Digital
*PCM (stereo): select this if your TV or A / V receiver has a digital audio input but can not
o
decode Dolby Digital
*Off: select this if you want the digital audio output to mute when a Dolby Dig
o
being received.
Stereo Surround
You can toggle Stereo Surround on or off by pressing
On: Surround information will be included in stereo output (Lt/Rt)
Off: Pure stereo audio output (L/R)
Audio Balance
You can adjust the value from L+7 to R+7. The selection "0" means balanced (equal
level) output on the two front speakers.
20
ll change to MPEG2 automatically. If the Audio Mode is set to Dolby
selection if you will be connecting your receiver to a
to select your choice. Like the
for the
l ogo).
igital Audio Selection Options.
Digital Audio Selection Options
Bitstre am
PCM (stereo)
3. Off
Same as above
PCM (stereo)
2. Off
and OK.
logo) or Dolby
ital program is