Panasonic TU-HDT105A Operating Instructions Book Manual page 10

Panasonic high definition digital receiver user manual
Table of Contents

Advertisement

Operating Instruction Book
TU-HDT105A
Mode B (HD, RGB)
The switch on the rear of the digital receiver
must be in position B, and the AV
connections must be taken from the RGB
HD15 socket. The digital receiver display
will show "Hd r". Press
selection, or switch to another mode.
Proceed to INSTALLATION.
Mode C (SD, CVBS)
The switch on the rear of the digital receiver
must be in position C, and the AV
connections must be taken from the CVBS
TV RCA socket. The digital receiver display
will show "Sdtv". Press
selection, or switch to another mode.
Proceed to INSTALLATION.
Installation
The on-screen display will ask which type of display
device is being used. You will have a choice of
either Plasma, LCD (Flat panel displays) or CRT
(eg Standard television).
Select from the choices using the remote control
keypad. The following screen will ask you to
confirm 576i / 576p (depending upon the current
mode). Follow the on-screen instructions to test HD576p, HD1152i, HD1080i and
HD720p formats.
Note: Not all video formats are available in all modes. The following table describes
the available formats in each mode.
LCD/Plasma
576i
576p
1080i
1152i
720p
10
OK
to confirm the
OK
to confirm the
HD (YPbPr)
CRT
LCD/Plasma
X
X
X
X
X
X
X
X
Table 1: Output format table
You have selected HD(RGB) format
You have selected SD(TV/CVBS)
format at the rear panel switch.
Please select the display type:
HD (RGB)
CRT
LCD/Plasma
X
X
X
X
X
X
at the rear panel switch.
Press OK to continue.
Press OK to continue.
1 Plasma Display
2 LCD TV
3 CRT TV
SD (CVBS)
CRT
X
X

Advertisement

Table of Contents
loading

Table of Contents