Removal Of Fan; Removal Of V1-Board, V2-Board And Operation Button - Panasonic TH-58PH10UK Service Manual

TH-58PH10UK

6.17. Removal of Fan

1. Disconnect the Fan Relay Connectors.
2. Remove 9 screws and then remove the 3 Fan Blocks.
3. Remove each 4 screws (K) and then remove the Fans.
4. Reassemble the Fans in reverse order.
5. Stick the Cushion (Fan) around the Fan.
Note:
The Cushion of Fan is not re-usable.
Please use a new one when Fan exchange.
6.18. Removal of V1-Board, V2-
Board and Operation Button
1. Remove the S1-Board Block.
(Refer to Removal of S1-Board)
2. Disconnect the connectors (DS2, DS15).
3. Remove 8 screws of the Escutcheon.
4. Pull the bottom of the Plasma Panel forward (arrow1).
5. Slide the Plasma Panel and then remove the Plasma Panel
(arrow2).
6. Remove 20 screws and then remove the Fixed Angle (A, B,
C).
7. Remove 1 screw (L).
8. Disconnect the connector (V2) and then remove V1-Board.
9. Remove the Operation Button from V2-Board.
10. Disconnect the connector (V15) and then remove V2-
Board.
14