Removal Of S1-Board - Panasonic TH-58PH10UK Service Manual

6.15.2. Removal of C2-Board
1. Remove 3 screws and then remove the AC-Inlet Block.
2. Remove the Flexible Cables from the connectors (C20,
C21, C22).
3. Remove 8 screws ( ) and then remove the Flexible Cables
from the connectors (CB5, CB6, CB7, CB8).
4. Remove 6 screws ( ) and then remove C2-Board.
6.15.3. Removal of C3-Board
1. Remove 1 screw and then remove the Wire Support.
2. Remove the Flexible Cable from the connector (C32).
3. Disconnect the connectors (C33, C35).
4. Remove 6 screws ( ) and then remove the Flexible Cables
from the connectors (CB9, CB10, CB11).
5. Remove 5 screws ( ) and then remove C3-Board.

6.16. Removal of S1-Board

1. Remove 2 screws (H) and then remove the S1-Board Block.
2. Disconnect the connector (S34).
3. Remove 1 screw (J) and then remove S1-Board.
13
TH-58PH10UK