Important Safety Instructions; General Safety - Beko HII 63500 T Manual

2

Important safety instructions

This section contains safety
instructions that will help you avoid
risk of injury and damage. All
warranties will become void if you do
not follow these instructions.

General safety

• This product is not intended to be
used by persons with physical,
sensory or mental disorders or
unlearned or inexperienced people
(including children) unless they are
attended by a person who will be
responsible for their safety or who
will instruct them accordingly for
use of the product.
Children must be supervised to
prevent them from tampering with
the product.
• Connect the product to an earthed
outlet/line protected by a fuse of
suitable capacity as stated in the
"Technical specifications" table.
Have the earthing installation
made by a qualified electrician
while using the product with or
without a transformer. Our
company shall not be liable for any
problems arising due to the
product not being earthed in
accordance with the local
regulations.
• If the supply cord is damaged, it
must be replaced by the
manufacturer, its service agent or
similary qualified persons in order
to avoid a hazard.
• Do not operate the product if it is
defective or has any visible
damage.
• Do not carry out any repairs or
modifications on the product.
However, you may remedy some
troubles that do not require any
repairs or modifications. See
Troubleshooting, page 29.
• Never wash down the product with
water! There is the risk of electric
shock!
• Never use the product when your
judgment or coordination is
impaired by the use of alcohol
and/or drugs.
• Product must be disconnected
from the mains during installation,
maintenance, cleaning and repair
procedures.
• Be careful when using alcoholic
drinks in your dishes. Alcohol
evaporates at high temperatures
and may cause fire since it can
ignite when it comes into contact
with hot surfaces.
• Do not heat closed tins and glass
jars in the oven. The pressure that
would build-up in the tin/jar may
cause it to burst.
• Do not place any flammable
materials close to the product as
the sides may become hot during
use.
• Keep all ventilation slots clear of
obstructions.
• Make sure that the product
function knobs are switched off
after every use.
6 | EN