Service Positions; Foam Bars; Aluminium Stands; Cable Dressing Step 2K6 Styling - Philips FJ3.0E Service Manual

EN 14 4. FJ3.0E LA
4.2

Service Positions

For easy servicing of this set, there are a few possibilities
created:
• The buffers from the packaging.
• Foam bars (created for Service).
• Aluminium service stands (created for Service).
4.2.1

Foam Bars

Required for sets
1
42"
Figure 4-5 Foam bars
The foam bars (order code 3122 785 90580 for two pieces) can
be used for all types and sizes of Flat TVs. Sets with a display
of 42" and larger, require four foam bars [1].
Caution: Ensure that the foam bars are always supporting the
cabinet and never only the display.
By laying the TV face down on the (ESD protective) foam bars,
a stable situation is created to perform measurements and
alignments. By placing a mirror under the TV, you can monitor
the screen.
Mechanical Instructions
Figure 4-4 Cable dressing Step 2k6 styling (42PF9641D/10)
1
E_06532_018.eps
011106
4.2.2

Aluminium Stands

Figure 4-6 Aluminium stands (drawing of MkI)
The new MkII aluminium stands (not on drawing) with order
code 3122 785 90690, can also be used to do measurements,
alignments, and duration tests. The stands can be
(dis)mounted quickly and easily by means of sliding them in/out
of the "mushrooms". The new stands are backwards
compatible with the earlier models.
Important: For (older) FTV sets without these "mushrooms", it
is obligatory to use the provided screws, otherwise it is possible
to damage parts inside the set !
G_15990_185.eps
021006
E_06532_019.eps
170504