Led/Ir Sensor Removal - Philips FJ3.0E Service Manual

4.4.9 LCD Display Panel
For exchanging the LCD display, see figures "LCD Display
Panel removal".
1. Remove the rear cover, as described previously.
2. Remove screws [1]
3. Remove brackets [2].
4. Unplug LVDS connector [3] from the panel.
5. Unplug connector [4] of the IR/LED panel from the SSB.
6. Unplug connectors [5] from the loudspeakers.
7. Unplug connectors [6] from the ambilight lamp inverter
PWB.
8. Remove screws [7] and put the keyboard control unit on
the subframe.
9. Release the Mem. Card Reader/Side I/O [8] and put it on
the subframe.
10. Unplug connector [9] from the X-Main PWB.
11. Remove screws [10].
12. Remove the subframe [11].
13. Remove screws [12].
14. Remove brackets [13] and plastic ambilight lamp frame
[14].
15. Remove the LCD panel [15].
1 1
1 1
Figure 4-30 LCD Display panel removal 1/4
10
6
7
10
5
7
Figure 4-31 LCD display panel removal 2/4
Mechanical Instructions
1 1
2
1 1
G_15990_135.eps
110506
3
10
6
9
4
8
10
5
G_15990_136.eps
120506
FJ3.0E LA
Figure 4-32 LCD display panel removal 3/4
15
Figure 4-33 LCD display panel removal 4/4

4.4.10 LED/IR Sensor Removal

1. Carry out the disassembly of the LCD panel, as described
previously, except for the last point.
2. Remove screws [1] .
3. Unplug connector [2].
Figure 4-34 LED/IR sensor removal
4. EN 21
13
3 12
14
13
G_15990_137.eps
120506
G_15990_138.eps
110506
2
1
G_15990_139.eps
110506