Recording From A Satellite Receiver; Manual Recording; Stb/Satellite Receiver)-Ext Link - Panasonic Diga DMR-EZ47VEB Operating Instructions Manual

Recording from a Satellite Receiver

[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [VHS]

Manual Recording

Preparation:
 ]RAM\ If the disc is protected, release protection
( 56).
 [VHS] Ensure accidental erasure tab is intact.
 Connect a satellite receiver to this unit's input
terminals ( 9).
 When the output signal from the external equipment
is NTSC, change the "TV System" to "NTSC" in the
Setup menu ( 63).
With the unit stopped.
INPUT
to select "AV2" for the
SELECT
satellite receiver you have
connected.
DRIVE
to select the DVD or VHS
SELECT
drive.
– Insert a disc or video cassette with enough
remaining blank space (
REC MODE
to select the recording
mode.
Select the channel on the satellite
receiver.
REC
to start recording.
Tips
To skip unwanted parts
Press [PAUSE] to pause recording. (Press again to restart
recording.)
To stop recording
Press [STOP].
Linked timer recordings with external
equipment (SKY Digital STB/satellite
receiver) — EXT LINK
To record programmes from a SKY Digital STB/satellite
receiver using timer programming
Preparation:
 ]RAM\ If the disc is protected, release protection
 [VHS] Ensure accidental erasure tab is intact.
 Make sure you connect the AV2 input terminal of
 Set the "AV2 Input" and "Ext Link" to match the
72, 74).
To cancel the external control
Press [EXT LINK] to stop recording or to cancel linked timer
recording standby (The unit turns on and ''EXT-L" disappears.).
Manual timer recordings (
 In order to prevent accidental operation, press [EXT LINK] to
 This function does not work with some equipment. Refer to the
 The beginnings of recordings may not be recorded correctly in
 When "Ext Link" is set to "Ext Link 2", this function does not work
 Programmes are recorded as one title on this unit when the end
 While the unit is in EXT LINK standby mode or recording, video
( 56).
this unit to "VCR Scart Terminal" of a SKY Digital
STB/satellite receiver with a 21-pin scart cable
( 9).
connected equipment in the Setup menu (
Make timer programming on SKY
Digital STB/satellite receiver.
− Refer to the equipment's operating instructions.
DRIVE
to select the DVD or VHS
SELECT
drive.
– Insert a disc or video cassette with enough
remaining blank space (
EXT LINK
− The unit turns off and "EXT-L" lights on the
unit's display to indicate timer recording
standby has been activated.
− While the unit is in EXT LINK standby mode
or recording, most operations on this unit are
prohibited ([ OPEN/CLOSE], [/l] etc.).
When you operate, press [EXT LINK] to
cancel EXT LINK standby mode or recording
(The unit turns on and "EXT-L" disappears.).
Tips
26)
Notes
cancel the setting after recording is fi nished.
equipment's operating instructions.
some cases.
if the input signal is NTSC system.
time of the earlier timer recording and the start time of the later
timer recording are close to each other.
[RAM] To divide the titles, go to "Divide Title" (
picture is from the AV2 input terminal irrespective of "AV1 Output"
setting ( 63).
63).
72, 74).
46).
23
RQT8857