Playback Issues Sound - Panasonic Diga DMR-EZ47VEB Operating Instructions Manual

Playback Issues
No sound.
Low volume.
Distorted sound.
Cannot hear the desired
audio type.
Cannot switch audio.
Sound
 Check the connections and the "Digital Audio Output" settings. Check the
input mode on the amplifier if you have connected one.
 Check if TV is muted.
 Check if amplifier is muted.
 Sound is not output while fast-forwarding during chasing playback and
simultaneous record and playback.
 Set "V.S.S." in the Sound menu to "Off" in the following cases:
– When using discs that do not have surround sound effects, such as
Karaoke discs
– When playing bilingual broadcast programmes
 The sound effects will not work when the bitstream signal is output from
the HDMI AV OUT terminal or the DIGITAL AUDIO OUT terminal.
 Audio may not be heard when more than 4 devices are connected with
HDMI cables. Reduce the number of connected devices.
 To output audio from a device connected with an HDMI cable, set "Digital
Audio Output" to "HDMI and Optical" in the Setup menu.
 Depending on the connected equipment, the sound may be distorted if this
unit is connected with an HDMI cable.
 You cannot switch the audio in the following cases.
– When a DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R, +R DL or
+RW disc is in the disc tray while DVD drive is selected.
– When the recording mode is XP and "Audio Mode for XP Recording" is
set to "LPCM".
 When recording a digital broadcast with multiple audio channels, this will
record only the audio channel selected in "DVB Multi Audio" in the on-
screen display. The audio channel cannot be switched during playback.
 You have used a digital connection. Set "Dolby Digital" to "PCM" or connect
using audio cables (analogue connection)
 There are discs whose audio cannot be changed due to how the disc was
created.
Page
61, 68
−
−
−
55
−
−
63
−
−
61
55
61, 68
−
81
RQT8857