Samsung galaxy note 7 User Manual page 223

2. Tap Wi-Fi.
The Wi-Fi settings menu appears.
3. Tap On/Off to turn Wi-Fi on.
Wi-Fi is enabled. You will see the names and security settings of in-range Wi-Fi networks.
To disable Wi-Fi, tap On/Off again.
l
4. Tap a Wi-Fi network, enter the password, and tap Connect.
Your phone is connected to the selected Wi-Fi network.
5. Configure your Wi-Fi settings.
Your Wi-Fi settings changes are saved.
The password, for a household wireless LAN router, is sometimes found on a sticker on the
l
router (WEP, WPA, KEY, etc.). Contact the router manufacturer for information. For the
password for a public wireless LAN, check with user's service provider.
Entering a password is not required if an access point is not security protected.
l
Connect to a Wi-Fi Network Using WPS
Wi-Fi Protected Setup (WPS) is a network security standard that allows you to easily secure a
wireless network connection between your phone and a router.
To connect using a WPS button:
1. From Wi-Fi settings, tap Advanced > WPS push button.
2. Press the WPS button on your router.
3. Follow the prompts to complete the connection.
Settings Connections Settings 211