Recording; Recording Television Programmes - Panasonic Diga DMR-EH575 Operating Instructions Manual

Recording television programmes

1
Numbered
buttons
∫
3,4,2,1
OK
5
AUDIO
See also "Important notes for recording" (➡ 8).
Depending on the type of disc used for recording or the type of
broadcast, there may be restrictions on the title you are trying to record.
≥[RAM] It is not possible to record continuously from one side of a
double sided disc to the other. You will need to eject the disc and
turn it over.
≥[+RW] You can create Top Menu using "Create Top Menu" (➡ 60).
Recording or editing on the disc may delete the menu. In that case,
create the menu again.
[HDD]
≥You can record up to 500 titles on HDD. (When continuously recording
for long durations, titles are automatically divided every 8 hours.)
[RAM] [-R] [-RW‹V›]
≥You can record up to 99 titles on one disc.
[+R] [+RW]
≥You can record up to 49 titles on one disc.
Preparation
≥Turn on the television and select the appropriate video input to suit
the connections to this unit.
≥Turn on this unit.
1
Press [DRIVE SELECT] to select the
HDD or DVD drive.
The HDD or DVD indicator lights up on the unit's display.
2
If you selected the DVD drive
Press [< OPEN/CLOSE] on the main
unit to open the tray and insert a disc.
≥Press the button again to close the tray.
≥When using 8 cm DVD-RAM, or 8 cm DVD-R, remove the
disc from the cartridge.
Insert label-up.
Automatic drive select function
[RAM] [Only for discs with the write-protect tab on the cartridge
set to "PROTECT" (➡ 58, Cartridge-protection)]
[DVD-V] [VCD] [CD]
≥If the unit is recording to the HDD or stopped, it
automatically switches to the DVD drive when a disc is
inserted.
≥If you eject a disc and close the disc tray, the HDD drive is
automatically selected.
RQT8881
26
2
∫
DVD 3
TV TV
Í
Í
VOL
CH CH
DRIVE DRIVE
SELECT SELECT
AV AV
PAGE PAGE
1 2 3
3
CH CH
4 5 6
ShowView ShowView
7 8 9
PROG/CHECK
DELETE
0 INPUT
SELECT
SKIP SKIP SLOW/SEARCH SLOW/SEARCH
;
PAUSE PAUSE PLAY/x1.3
STOP STOP
EXIT
OK
OPTION
RETURN RETURN
CREATE CREATE
MANUAL SKIP MANUAL SKIP
CHAPTER CHAPTER
REC REC REC MODE REC MODE EXT LINK EXT LINK DIRECT TV REC DIRECT TV REC
4
AUDIO AUDIO STATUS STATUS DISPLAY DISPLAY TIME SLIP TIME SLIP
∫ Cartridge disc
Insert label-up with the
arrow facing in.
Insert fully.
3
Press [W X CH] to select the channel.
REC OPEN/CLOSE
To select with the numbered buttons:
5
e.g.,
4
Press [REC MODE] to select the
recording mode (XP, SP, LP or EP).
≥To record sound using LPCM (XP mode only):
Set the "Audio Mode for XP Recording" to "LPCM" in the
Setup menu (➡ 64).
5
Press [¥ REC] to start recording.
Recording will take place on open space on the HDD or on
disc. Data will not be overwritten.
≥You cannot change the channel or recording mode during

recording.

≥You can record while the unit is in standby for timer
recording, but once the time for the timer recording to begin
is reached, any recording taking place will stop and the timer
recording will begin.
≥[HDD] [RAM] When "Rec for High Speed Copy "is set to "Off"
(➡ 63), you can change the audio being received by
pressing [AUDIO] during recording. (Does not affect the
recording of audio.)
∫ To pause recording
Press [;].
Press again to restart recording.
You can also press [¥ REC] to restart.
(Title is not split into separate titles.)
∫ To stop recording
Press [∫].
≥From the start to the end of the recording is called one title.
≥[-R] [-RW‹V›] [+R] [+RW] It takes about 30 seconds for the unit to
complete recording management information after recording
finishes.
In order to play DVD-R, DVD-RW (DVD-Video format) and +R
(recorded with this unit) on other DVD players, it is necessary to
finalise them (➡ 60).
If a station broadcasts Teletext information
The unit automatically records the programme's and station's name
if the station's Title Page is correctly set (➡ 67).
[Note]
The unit may take some time in retrieving titles (up to 30 minutes)
and may fail in some cases.
Quick Start (➡ 66)
1 Sec. Quick Start for Recording & EPG Display
(When connecting to TV using 21-pin Scart, Component Video,
Video or S Video terminals)
From the power on, recording on DVD-RAM and HDD starts in
about 1 second after the REC button is pressed. If the GUIDE
button is pressed while the unit is off, the Electronic Program
Guide (EPG) displays in less than 1 second. (Quick Start Mode)
≥"Quick Start" is set to "On" at the time of purchase.
≥Depending on the type of TV or the connected terminal, it may
take time to display the screen.
[Note]
Startup takes up to a minute when:
–You play a disc or start recording to discs other than DVD-
RAM.
–You want to make other operations.
–The clock has not been set.
REC REC
[0] ➡ [5]
5:
[1] ➡ [5]
15:
REC REC
REC
Remaining time
on the disc