Panasonic Diga DMR-EH575 Operating Instructions Manual page 73

Panasonic dvd recorder user manual
Hide thumbs Also See for Diga DMR-EH575:
Table of Contents

Advertisement

GUIDE Plus+
Why is the GUIDE Plus+ system only
available after approx. 2 hours?
How often is the GUIDE Plus+ data
updated and when?
Is it possible to programme a recording,
with a start and end time that are
different from the GUIDE Plus+ system?
Does the GUIDE Plus+ system support
VPS/PDC?
How can I cancel a TIMER
programming?
Can I receive GUIDE Plus+ system data
via a connected satellite receiver or a
Set Top Box?
What happens when I unplug my unit
from the power outlet?
What happens if my postal code
changes, e.g. if I move?
≥The data rate, at which GUIDE Plus+ is sent, is limited. Depending on the country, signal
quality and number of channels received, the time until the GUIDE Plus+ system is ready
can vary.
≥The GUIDE Plus+ data is transmitted from the Host Channel (the television station
transmitting the television programme list) several times a day. Data will be transmitted at
2:50 AM every day.
It takes approximately 2 hours to complete data download.
The GUIDE Plus+ data is downloaded automatically when the unit is turned off.
≥You can manually change the start and end time of programmes in the Timer Recording
menu.
≥The GUIDE Plus+ system works independently of VPS/PDC. However, you can
programme TIMER recordings with VPS/PDC in the Timer Recording menu.
≥The "F" symbol appears in the GUIDE Plus+ when a Timer Recording is programmed
with the GUIDE Plus+ system. To cancel a Timer Recording programming, press [PROG/
CHECK]. Select the desired entry and press [DELETE ¢].
≥No, only via the built-in tuner. To perform timer recordings with satellite receivers or Set
Top Boxes, please use the External Link feature or your unit's manual timer programming.
≥The GUIDE Plus+ system data will not be updated. If the unit is disconnected from the
power supply for a longer period of time, then the GUIDE Plus+ data is lost. Make sure
that the time is set again appropriately.
≥Change the postal code in the GUIDE Plus+ Setup menu. If necessary, perform a full
Auto-Setup. Saved GUIDE Plus+ data may be lost.
Page
22
32
34
33
32, 35
23
RQT8881
73

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents