Quick View; Splitting A Recording Into C Hapters; Time Slip - Panasonic DMR-ES30V Operating Instructions Manual

Playback
Quick View (Play/ x1.3)
Increase playback speed without negative effects on sound.
Press and hold PLAY during playback.
Press PLAY again to return to normal
playback speed.
Output takes place in PCM with a digital connection.
Quick View is cancelled if SKIP
pressed or playback of a programme begins that was not
recorded with Dolby Digital.
Quick View does not function during simultaneous recording
and playback in XP or FR mode .
CREATE
CHAPTER
Splitting a recording into c
Press CREATE CHAPTER during playback.
Press SKIP or SKIP
AUDIO
Changing the audio channel
RAM -RW VR
Press AUDIO. (
DVD-A DVD-V You can change the number of the audio channel,
e.g. the language setting, by
pressing the appropriate button.
If you cannot change the sound track, select the [PCM] setting in
the SETUP menu for Dolby Digital.
24
DVD-RAM
PLAY x1.3
, or PAUSE
hapters
to skip the chapter.
VCD
) LR L R
Soundtrack
1 ENG

TIME SLIP

JET REW
RAM
TIME SLIP
Press TIME SLIP.
Use
forward or back. If you press and hold the buttons, the time
span increases or decreases minute-by-minute.
Press ENTER to confirm the selected time.
Press PLAY
is
Delayed playback
RAM
Playback can be started while the unit is still recording. Without
stopping the current recording, you can view the recording from
the beginning.
Press STOP
Digital 3/2.1ch
After 2 seconds, press STOP
Use TIMER to stop a TIMER-controlled recording.
RAM -R -RW V +R -RW VR
( ) ( )
to select the time that the playback should jump
to hide the picture in picture.
The TV picture is shown as picture-in-picture.
PLAY
0 min
Playback picture
Currently received picture (receive channel).
ARD
The receive channel can be switched using the
CH , button. This is not possible during a
recording.
RAM
PLAY
0 min
Playback started 30 seconds ago.
REC
Image currently being recorded.
to end the playback.
again to stop the recording.
DVD