Use; Smart Control Panel; Description Of The Control Panel - Swegon CASA R3 Smart Instructions For Use Manual

2. Use

1.2.1 Smart control panel

The control panel is equipped with a colour
screen and three touch buttons. When the
panel is not used it enters standby mode. The
delay and screen brightness and content in
standby mode can be selected by the user.
The control panel leaves standby mode when
any button is touched.
The control panel has a built-in temperature
sensor that can be used to measure the room
temperature.

2.1.2 Description of the control panel

1. Time display.
2. Room temperature display.
3. The symbol for Smart functions.
The symbol here specifies what happens
when you press the button under the
symbol. In the situation shown, the Smart
functions menu opens. On the other hand,
for example, when the fireplace function
or any corresponding function is in use,
the symbol for the activated function is
shown here. Pressing the button again
stops the activated function.
4. Display of the operating mode in use.
The symbol indicates the speed at which
the ventilation unit is running. If any of the
automatic Smart functions are in use, the
symbol for the current function is shown
here.
5. The symbol for main menu.
The symbol here specifies what happens
when you press the button under the
symbol. In the situation shown, the main
menu opens.
6. Up button
The function of the button depends on
the control panel's operating mode . In the
basic mode the button performs the func-
tion indicated by the symbol above the
button. In menu view the button is used to
move the cursor up and in setting mode it
is used to increase the current value. If the
button is pressed and held in menu view,
the cursor moves to the start of the menu
(return).
Swegon reserves the right to alter specifications.
1
4
3
6 7
7. Select button
The function of the button depends on
the control panel's operating mode . In the
basic mode the button is used to select the
ventilation unit's operating mode. In the
menu view the button is used to activate
setting highlighted by the cursor to modify
and to confirm a new setting. If the but-
ton is pressed and held in menu view, the
screen returns to basic mode. If the button
is pressed and held in "Smart functions"
menu, the selected function is opened for
setting.
8. Down button
The function of the button depends on the
control panel's operating mode . In the ba-
sic mode the button performs the function
indicated by the symbol above the button.
In menu view the button is used to move
the cursor down and in setting mode it is
used to decrease the current value. If the
button is pressed and held in menu view,
the cursor moves to the end of the menu.
www.swegonhomesolutions.com
2
5
8
EN
89