English GENERAL SAFETY RULES SPECIFICATIONS ■ Always wear personal protective safety glasses, Sanding Pad 90 x 150 mm (5-7/8” x 7-3/4”) gloves, ear protectors, face mask or respiratory equipment and protective clothing. No-load speed 8,000 opm ■ Always ensure machine is switched off before Avg air consumption 170 L/min (6 cfm) connecting air supply.
English LOADING AND OPERATION WARNING Ensure the air supply is clean and does not exceed WARNING 90psi while operating the tool. Too high an air pressure and unclean air will shorten the product life due to Drain the air tank daily. Water in the air line will damage the tool.
English – Grit or gum deposits in the tool may also reduce PROBLEM: Tool runs slowly. Air fl ows slightly from performance. If your model has an air strainer exhaust. (located in the area of the air inlet), remove the strainer and clean it.
English PARTS LIST Description Description Description Description Trigger Rotor key 3x5x13 Rubber mount Pin 4*35 Spring Sealing Washer Retaining Ring Cap screw M4x6 O-ring 11x2 Cap screw M5x10 Bearing screw M5*10 Gasket washer Paper clamp Motor Housing Retainer 8 Base Base Retainer 6 Cylinder Cap...