Claws
2.5 BACKLIGHT UNIT, LCD PANEL
(1) BACKLIGHT UNIT
1. Remove the flexible printed wired board of the BACKLIGHT UNIT.
2. Remove the screw.
3. Rotate the BACKLIGHT UNIT in the direction of arrow and remove it by releasing the claws.
4. Remove the flexible printed wired board of the LCD PANEL.
(2) LCD PANEL
1. Release the four claws in the top and bottom, and remove the LCD PANEL in the direction of arrow.
(1)-4
BACKLIGHT UNIT
(1)-3
(1)-1
(1)-3
Claws
Fig. 3-7 BACKLIGHT UNIT, LCD PANEL
3-7
CHAPTER 3. REPAIR INSTRUCTION
NOTE (Assembling)
The BACKLIGHT UNIT that is
supplied as the service part has
the protection sheet on the back.
Remove it.
(1)-2
c
(2)-1
Claws
(2)-1
LCD PANEL
(2)-1