Table of Contents
Advertisement
2. Remove the P.C.B. ass'y from the motor case U.
3. Remove the motor support front from the motor and then
the thermal protecter inserted into the motor case U.
4. Remove the lead wire, from the P.C.B., connected to the
motor ass'y terminal.
The P.C.B. Ass'y is removed simultaneously.
5. Remove the noise supporessor, motor support rubber
(rear), and motor support rubber (front).
* Precautions for re-assembly
Tape is pasted on the lead wire terminals of compo-
nents on the P.C.B. Ass'y.
The tape must not be removed when components are
replaced.
If the tape is removed by mistake, then use tape for
servicing.
Servicing component part number: AMC56L-1800P
Component name: Gasket V
9
Advertisement
Table of Contents
