Clevo W150ERQ Service Manual page 37

5. Carefully lift up the heat sink
6. Turn the release latch towards the unlock symbol
C
7. Carefully (it may be hot) lift the CPU
8. See page 2 - 14 for information on inserting a new CPU.
9. When re-inserting the CPU, pay careful attention to the pin alignment, it will fit only one way (DO NOT FORCE IT!).
c.
d.
Unlock
(Figure 9c) off the computer.
B
, to release the CPU
D up out of the socket (Figure
B
e.
C
(Figure 9d).
9e).
D
Removing and Installing a Processor 2 - 13
Disassembly
Figure 9
Processor Removal
(cont'd)
c. Remove the heat sink.
d. Turn the release latch to
unlock the CPU.
e. Lift the CPU out of the
socket.

B. Heat Sink
D. CPU