Step 2 The Remote Control - Panasonic DVD-K32 Operating Instructions Manual

RQT8685-2B.fm Page 6 Tuesday, April 25, 2006 9:05 AM
STEP 1
Connection to a television
∫ Enjoying multi-channel surround sound
Coaxial cable
Amplifier with a built-in
decoder or a decoder-
amplifier combination
COAXIAL IN
Change "DOWN SAMPLING", "DOLBY DIGITAL", "DTS" and "MPEG
"AUDIO" tab).
§ [The\United\Kingdom,[Australia\and\N.Z.\
∫ Connect the AC mains lead last
FOR THE UNITED KINGDOM ONLY
READ THE CAUTION FOR AC MAINS LEAD ON PAGE 2 BEFORE CONNECTION.
AC mains lead (included)
To household mains socket
Configuration of the AC inlet differs according to the area.
Unit with PX printed on the outer packaging
If the power plug does not fit your AC outlet, use the
power plug adaptor (included).
If it still doesn't fit, contact an electrical parts
distributor for assistance.
[DVD-K32]
only
∫ Connect to the ground terminal
Ground the unit by connecting a copper wire to the screw on the back of the unit and
the ground terminal to prevent static electricity buildup caused by the karaoke
microphone.
6
Y P
B
L
P
R
R
Please connect directly to y TV. V V
COMPONENT COMPONENT
VIDEO OUT
Back of the unit
§ " (➜ page 15,
L
R
AC IN
To the ground terminal
SIGNAL EARTH
STEP 2
The remote control
∫ Batteries
≥ Insert so the poles (i and j) match those in the
remote control.
≥ Do not use rechargeable type batteries.
R6/LR6, AA
Do not:
≥ mix old and new batteries.
≥ use different types at the same time.
≥ heat or expose to flame.
≥ take apart or short circuit.
≥ attempt to recharge alkaline or manganese
batteries.
≥ use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage
which can damage items the fluid contacts and may
cause a fire.
Remove if the remote control is not going to be used
for a long period of time. Store in a cool, dark place.
∫ Use
Aim at the remote control sensor (➜ page 8), avoiding
obstacles, at a maximum range of 7 m directly in front
of the unit.