Step 1 Connection To A Television - Panasonic DVD-K32 Operating Instructions Manual

RQT8685-2B.fm Page 5 Tuesday, April 25, 2006 9:05 AM
STEP 1
Connection to a television
≥ Do not place the unit on amplifiers or equipment that may become hot. The heat can damage the unit.
≥ Do not connect through the video cassette recorder. Due to copy guard protection, the picture may not display properly.
≥ Turn off all equipment before connection and read the appropriate operating instructions.
≥ Connect the terminals of the same colour.
≥ Unless otherwise indicated, illustrations are of the models for areas except the United Kingdom.
(\The\United\Kingdom\ :There is no S VIDEO OUT terminal on the unit.)
With VIDEO IN or S VIDEO IN
AUDIO IN VIDEO
R L IN
S video cable
Audio/video
cable
Y
L
R
Please connect directly to TV. COMPONENT
VIDEO OUT
§
1 When using this connection, the audio cable
(red and white plugs) should also be connected.
§
[Australia\and\N.Z.\: included
2
[Unit\with\PX\printed\on\the\outer\packaging]: included
[Asia]: included
\The\United\Kingdom]: not included
You can connect the audio cable to the 2-
channel audio input terminals of an analog
amplifier or system component to enjoy
stereo sound.
Television
With COMPONENT VIDEO IN
AUDIO IN
S VIDEO
or
R L
IN
§
1
Audio/video
§
§ cable 2
2
P
B
L
P
R
R
[Unit\with\PX\printed\on\the\outer\packaging]
Select "DARKER" from the "BLACK LEVEL" (➜ page 14,
"VIDEO" tab).
To enjoy progressive video
Connect to a progressive output compatible television.
1 \The\United\Kingdom]
Set "VIDEO OUT-SCART" to "VIDEO/YPbPr" for component
terminals. (➜ page 14, "VIDEO" tab).
2 Set "VIDEO OUT (I/P)" to "PROGRESSIVE", then follow the
instructions on the menu screen (➜ page 14, "VIDEO" tab).
\The\United\Kingdom]
Panasonic televisions with 625 (576)/50i · 50p, 525 (480)/60i .
60p input terminals are progressive compatible.
Back of the unit
COMPONENT
VIDEO IN
Video
21-pin SCART
Not used
cables
cable
Y P
B
≥ If the television is compatible with S-
P
R
Please connect directly to y TV. V V
COMPONENT
VIDEO OUT
\The\United\Kingdom]
With SCART (AV) IN
SCART (AV) IN
AV
video, select "S-VIDEO/YPbPr", or
compatible with RGB, select "RGB/
NO OUTPUT" for the AV terminals
(➜ page 14, "VIDEO" tab).
(Continued on the next page) 5