Description
DATA TRANSFER JIG
HOOK RELEASE JIG
TESTER CONNECTION CABLE
DATA TRANSFER JIG
Note: Follow the disassembly procedure in the numerical order given.
CABINET (UPPER)
4 claw
CABINET LOWER
2 flex PWB, ass'y
3 cabinet lower
JIGS AND TOOLS
Part No.
1-792-172-11
3-043-180-01
1-792-726-11
DISASSEMBLY
2 three claws
1
SECTION 4
NECESSARY FOR SOFTWARE UPDATE
FOR HOUSING OPENING
FOR CONNECTION TO GSM MEASURE EQUPMENT
HOOK RELEASE JIG
SECTION 5
3
2 three claws
ground terminal point of contact
Note 1: Do not touch the ground point of contact
on the flex PWB, ass'y.
Note 2: Do not make the ground point of contact
get into the cushion (vibra-motor).
Note 3: Clearn the ground point of contact
with alcohol by cotton fixed to a stick
when it is touched by greasy hands.
Remark
TESTER CONNECTION CABLE
1 two screws
5 cabinet (upper)
cushion (vibra-motor)
9